This complete system comes with a SaniPlus macerator pump and SaniFlush two piece round bowl and white tank. The Saniplus is a system that is used to install a complete bathroom up to 15 ft. below the sewer line, or even up to 150 ft. away from a soil stack. It can handle the effluent from a toilet, sink, bathtub and shower. The inside of the Saniplus comprises of a pressure chamber, which starts and stops the unit, and the motor, which drives the stainless steel macerator blades and the pump.
Features
Addition to the toilet waste, the Saniplus will also discharge gray water from a variety of other sanitary fixtures such as: a sink, a bathtub, a shower and a urinal when adding a bathtub or shower, a base will have to be constructed this base should be made out of a 2 in. x 6 in. (minimum) or 2 in. x 8 in. (recommended) on edge, to allow for the installation of a P-trap and the required 1/4 in. per foot gravity flow towards the pump unit
Wastewater from other sanitary fixtures is discharged into the Saniplus via two 2 in. inlets on either side of the housing either one or both inlets can be used as required the discharge elbow on top of the Saniplus can be turned either to the left, to the right, or towards the back, depending on the discharge installation a non-return valve, which comes already assembled on the discharge elbow, prevents back flow into the unit
Design of this model consists of vibration absorbers which enable the reduction of operating sound by reducing the transmitted sounds from any location where such resonance transmission could occur this new design reduces the operating sound of this pump by 10dB
Unit has been designed with a vent connection on the lid all plumbing codes require connection to a vent system please note that the vent system should be a two-way air vent the use of mechanical vents, air admittance valves or similar devices are not permitted as these are considered one-way air vent systems it is also highly recommended for the macerator/pump to be connected to a Ground Fault Interrupter (GFI) circuit
Installation of this product may require products from each of the categories below.
Choose our top recommended product from each category, or choose "More" to see a full list from that category.
Installation of this product may require some of the following products from .
Compatible Products
Often Bought With Products
1.0
* Pricing Disclaimers:
"Your price" does not include project-specific pricing. If project-specific pricing is needed, please consult with your local sales team.
Prices may vary by region and without notice due to changes in market conditions.
Add products from
Add
The following products may be required
The following products may be required with your purchase of . Please adjust quantity for each product to add.
The following products may be required
The following products may be required with your purchase of . Please adjust cart quantity for each product.
Cannot add to cart
If this error is unexpected, please try logging out and in again.
Canadian Owned or Operated
Searching for stock at your location...