Often recessed in-floor for application, the Endura35gpm demonstrates our highest performance efficiency in the line. Like the Endura50 models the Endura35 units use an additional diffuser baffle in conjunction with the inlet baffle to manage wastewater flow and promote effective separation. Supplied with our accessible flow control in either 3"(03) or 4"(04) format, Endura 35 is compatible with our modular riser extensions (3935AX6) for a perfectly flush with floor finish. NSF Certified to CSA B 481.1, ASME A112.14.3 & PDI G101. Tank installed with Mechanical Joint (MJ) couplings (by others)
Features
Normally used in the drainage portion of the DWV system only
Maximum service temperature rated at (220F) +104C
Endura® lids supports 440 pounds of pedestrian and light duty traff ic
Injection molded tank, lid and baffles in engineered thermoplastic, that will not corrode, chip or peel, even under the most severe applications
Molded one piece tank eliminates seams and potential leaking
we ighs up to 60% less than directly equivalent metal competitors - offers ease of installation, transport and storage
connected using mechan ical jo int couplings allowing for use of various piping materials
Flexibility of installation - can be Installed in-floor, on-floor, or semi-recessed
Recessed silicone seal prevents unpleasant oders from leaving the interceptor
Supplied with accessible flow control device HxHxH for solvent weld installation to ABS and PVC DWV systems
Tank installed using mechanical joint couplings by others allowing for connection with various piping materials
Lightweight but highly durable construction offers ease of handling installation and product longevity compared to traditional interceptors
Cover exceeds CSA B481 0 Class L Proof load min 600lb 270kg Expected service load Max 300lb 135kg
Suitable for in floor or on floor installations
EZ Open cover latching system provides simple fastener free solution for regular maintenance access
3 No Hub connection compatible with DWV piping 4 04 models also available
Maximum service temperature rated at 220 Deg F 104 Deg C continuous discharge
Tank lid and baffles injection molded in engineered thermoplastic that will not corrode chip or peel even under the most severe applications
Installation of this product may require products from each of the categories below.
Choose our top recommended product from each category, or choose "More" to see a full list from that category.
Installation of this product may require some of the following products from .
Compatible Products
Often Bought With Products
1.0
* Pricing Disclaimers:
"Your price" does not include project-specific pricing. If project-specific pricing is needed, please consult with your local sales team.
Prices may vary by region and without notice due to changes in market conditions.
Add products from
Add
The following products may be required
The following products may be required with your purchase of . Please adjust quantity for each product to add.
The following products may be required
The following products may be required with your purchase of . Please adjust cart quantity for each product.
Cannot add to cart
If this error is unexpected, please try logging out and in again.
Canadian Made
Searching for stock at your location...